Sorry, nothing in cart.
Champion Flocculant Tablets Clarifies pool water by total floc treatment. Removes debris following shock treatment.Coagulates fine particles which make pool water cloudy.
IMPORTANT NOTE: MOST CASES OF CLOUDY POOL WATER ARE DUE TO SANITISER FAILURE, BECAUSE THE SANITISER LEVEL IS TOO LOW, OR BECAUSE THE pH IS OUTSIDE THE NORMAL RANGE (7.2 – 7.6). ALWAYS CHECK AND ADJUST pH AND SANITISER LEVELS BEFORE USING FLOCCULANT. IF THE CLOUDINESS PERSISTS AFTER THE pH AND SANITISER LEVELS HAVE BEEN IN THE NORMAL RANGE FOR AT LEAST 24 HOURS. THEN YOU CAN USE FLOCCULANTS.
Add 2 X Tablets Champion Flocculant per 100 cubic metres of pool water (30 ounces per 10,000 gallons).
Check the pH of the pool water and adjust this to an ideal pH of 7.5 or between pH 7.2 and 7.6 by use of the recommended pH adjustment chemicals.
Alternatively, place Champion Flocculant Tablets into your pool skimmer(s), until the right quantity for the pool has been used in total. When the solution has been distributed throughout the pool water, turn off the circulation pump for a few hours. Champion Flocculant will gather suspended particles and settle onto the pool floor. You may see a heavy silt or sediment. Restart the circulation pump and vacuum the floc and gathered debris to waste.
DO NOT ALLOW THIS SEDIMENT MATERIAL TO BUILD UP IN YOUR FILTER MEDIUM, OR IT MAY OVERLOAD THE FILTER WHICH MAY, IN TURN, SIMPLY RETURN THE SEDIMENT TO YOUR POOL.
Check and re-adjust the pH to around 7.5 and Free Chlorine to not less than 2.0 ppm.
NOTE: FOR USE WITH SAND FILTER SYSTEMS ONLY. NOT TO BE USED WITH CARTRIDGE OR DIATOMACEOUS EARTH FILTERS.